Assemble Pro Now Works Inside Claude and ChatGPT
Assemble Pro is takeoff and estimating software with a built-in MCP connection, so you can run takeoffs and build estimates from Claude, ChatGPT or any AI assistant that supports MCP. Connect it once, in about five minutes. Then type what you want: "start a new job from these drawings", "measure the walls on page 2", or "build an estimate from my extension template".
See the Assemble Pro AI page for the setup steps, what it can do and pricing.
The AI works inside your own Assemble account, with your library, your assemblies and your prices. It can only see and change what you allow. Before it changes anything, it shows you exactly what it will do and waits for you to say yes.
We built Assemble Pro for small contractors who price their own work, often at night after a day on site. The MCP connection means you can hand the counting and measuring to the AI you already use, and keep control of the numbers that win you the job.
What you can do with it
MCP (Model Context Protocol) is an open standard that lets AI assistants use other software on your behalf. With Assemble Pro connected, your assistant can read drawings, take measurements, count items, edit your price library and build estimates, all in your account.
Good first things to ask:
"Here's the supplier's new price list. Update my library and tell me what moved more than 10%."
"Measure the external walls on sheet A-101 at 2.4 m high."
"How many D1 doors are on the ground floor?"
"Build a stud wall assembly: studs at 16-inch centres, two layers of board, screws at 10% waste."
"Prepare the estimate for the Murphy job and tell me why it's €4k more than v1."
"Here's the tender link. Set up a new job with these drawings and our bathroom template."
A real test: an electrical takeoff
We gave Claude (Opus 5.5) one instruction: "Go to the bungalow house job and mark and list out everything on the electrical plan." The drawing was a single-sheet tender electrical layout for a three-bed bungalow rebuild, a standard PDF. The marked-up result is the image at the top of this post.
In about three minutes, it identified 19 types of electrical item from the drawing's legend, placed a marker on each symbol, and counted 174 items in total. A manual takeoff of the same sheet takes us about an hour. Our co-founder Keith checked it against a manual count: every item drawn on the plan was counted correctly. The only items it didn't count were the kitchen appliance supplies and sockets that appear in the written notes but aren't drawn on the plan, and it flagged every one of them itself.
Item | Count |
|---|---|
Wall switch (1350 mm) | 38 |
Downlighter | 32 |
Double switched socket | 22 |
5 amp power circuit | 19 |
Wall light | 11 |
Dimmer switch | 10 |
Ceiling pendant | 9 |
LED concealed strip | 8 |
Double socket with USB A+C | 6 |
Cable TV point | 3 |
Ceiling sensor switch | 3 |
Eaves LED security light (PIR) | 2 |
Electric heated towel rail | 2 |
External ground light | 2 |
IP56 external power point | 2 |
Router / mesh node | 2 |
Doorbell | 1 |
Electrical consumer unit | 1 |
Window power and data spur | 1 |
Total | 174 |
The count wasn't the most useful part. Without being asked, it also listed what to check before pricing:
Items in the notes, not drawn. The kitchen and utility notes call for supplies to the hob, extractor, fridge, oven, microwave and instant hot tap, plus two counter sockets and a double socket in the island. None are drawn on the plan. External lighting and gate power are on the site plan.
Judgement calls. It counted the half-dome fittings over the basins and on the kitchen rafters as wall lights, and flagged that one or two basin fittings could be mirror heat pads. It counted a pair of side-by-side domes as one double socket, and each bedside switch as a single switch, so 2-way gangs aren't split out.
Not counted. The plan shows no data-only points, floor boxes, car charger or standalone extract fans. Cable runs and conduit lengths weren't measured, only fixture counts.
That's what an experienced estimator would flag on a first pass. The notes-not-drawn items alone are the kind of miss that costs a contractor money after the job is won.
The AI does the counting and measuring. Assemble Pro holds your rates, assemblies and templates, and turns those quantities into a priced estimate you can send.
How Assemble Pro measures: the AI points, Assemble measures
An AI looking at a drawing is good at knowing what to measure and poor at knowing exactly where. Left alone, its clicks land a wall's thickness off. So Assemble Pro splits the job:
Assemble Pro renders the sheet as an image sized for how AI models see best.
The AI proposes rough shapes: a wall from here to here, a polygon around the kitchen.
Assemble Pro snaps every point to the nearest line or corner actually drawn in the PDF.
Assemble Pro works out lengths and areas at the sheet's real scale, in metres or feet, with heights and depths applied.
You see the shapes drawn on the sheet with the totals, and say yes. Only then is it saved.
The quantities always come from Assemble Pro's own geometry, not from the AI's arithmetic. The same applies to assemblies: the AI describes the build-up, and Assemble Pro calculates the quantities.
It can also set a sheet's scale from the title block or two known points, find a room by its label and trace it, and count printed tags such as door and window marks.
What it doesn't do well yet
Busy, furnished, open-plan drawings: room tracing is hit and miss. Clean rooms trace well, and you always see the shape before it's saved.
Scanned drawings and some CAD exports have no readable text, so finding rooms by name and counting tags won't work. Measuring by pointing still does.
Drawing imports from a link are capped at 100 MB. Bigger sets use an upload link.
Nothing changes without your yes
Every change follows the same three steps:
You ask for a change.
The AI shows you a preview of exactly what will change.
You say yes, and only then does Assemble Pro save it, exactly as shown.
Previews expire after 30 minutes, so just ask again if one runs out. Every change appears in Assemble Pro afterwards, the same as if you'd made it yourself.
Other safeguards:
You choose what it can do. Read, change or send, area by area. Sending estimates to customers and changing company settings start switched off.
One workspace per connection. If you work in two companies, the AI only sees the one you connected.
It can't do more than you can. If your account is view-only, so is the AI.
Nothing is hard-deleted. Items are archived, never removed, and billing is out of reach.
Instructions hidden in documents can't change what gets saved. The change applied is the one you approved.
Disconnect any time from Settings → Connected apps. Changing your password disconnects everything, and workspace admins can switch AI apps off for the whole team.
How to connect Assemble Pro to Claude
You need an Assemble Pro account and a Claude account. A paid Claude plan is safest, as free plans may limit custom connectors. Until Assemble Pro is listed in Claude's connector directory, you add it as a custom connector.
Open Claude and go to Settings → Connectors.
Click Add custom connector.
Name it Assemble and paste
https://app.assemblepro.com/api/mcp. Click Add.Click Connect. An Assemble Pro window opens. Sign in if it asks.
Pick your workspace, then pick what the AI may do. "Send estimates" and "Change company settings" start switched off. Turn them on only if you need them.
Click Allow to return to Claude.
Start a new chat and ask: "Which Assemble workspace am I in?" If it answers with your workspace name, you're connected.
On a Claude Team or Enterprise plan, an owner may need to add the connector first. Everyone else then just clicks Connect.
How to connect Assemble Pro to ChatGPT
ChatGPT needs one extra switch, Developer mode, until Assemble Pro is listed in its app directory.
Open ChatGPT and go to Settings → Apps & Connectors → Advanced settings.
Turn on Developer mode.
Go back to Apps & Connectors and click Create.
Name it Assemble, paste
https://app.assemblepro.com/api/mcp, and set authentication to OAuth. Tick that you trust this app, then click Create.An Assemble Pro window opens. Sign in, pick your workspace and what the AI may do, then click Allow.
Start a new chat. Click +, choose Developer mode, and switch on Assemble.
Ask: "Which Assemble workspace am I in?"
On a ChatGPT Business or Enterprise plan, a workspace admin may need to allow Developer mode first.
Claude Code, Cursor and other assistants
Any assistant that supports MCP can connect to the same address. For tools without a sign-in screen, create an API key in Assemble Pro under Settings → Connected apps and choose its permissions there.
For Claude Code, run this in your terminal, then start Claude Code, type /mcp and sign in to Assemble Pro: claude mcp add --transport http assemble https://app.assemblepro.com/api/mcp
If something goes wrong
What you see | What to do |
|---|---|
"A workspace admin has turned off Connected apps for this workspace." | Ask your workspace admin to turn it on in Settings → Connected apps. |
The AI says it can't change something | You didn't allow that permission. Disconnect, then connect again with it ticked. |
It keeps asking you to sign in | Your sign-in has ended. Click Connect again in Claude or ChatGPT. |
Measurements look wrong | Check the page scale first. Scanned drawings work less well than PDFs exported from a drawing program. |
An open drawing doesn't show the AI's new measurements | Reload the page. AI-added measurements appear on the next save or reload. |
To disconnect, go to Settings → Connected apps in Assemble Pro. You'll see every connected app and when it was last used. Click Disconnect and it stops working immediately.
FAQ
Is there AI takeoff software that works with ChatGPT or Claude? Yes. Assemble Pro connects to Claude, ChatGPT and other MCP-compatible assistants. The AI can measure drawings, count tagged items, update prices and build estimates inside your Assemble Pro account.
Can ChatGPT or Claude do a construction takeoff? On their own, AI models can read a drawing but their measurements are imprecise. Connected to Assemble Pro, the AI proposes what to measure and Assemble Pro snaps each point to the PDF's real linework and calculates quantities at the sheet's scale.
What is an MCP server for construction estimating? An MCP server lets an AI assistant use your estimating software directly. Assemble Pro's MCP server gives Claude, ChatGPT, Claude Code and Cursor access to takeoff, assemblies, templates, price libraries and estimates.
Does Assemble Pro work in metric and imperial? Yes. Measurements, assemblies and estimates work in metres or feet in the same tool.
Can the AI change my estimates without asking? No. Every change is previewed first and saved only after you approve it. Sending estimates and changing company settings are switched off by default.
Who is Assemble Pro for? Small and mid-sized contractors, typically 1 to 20 people, in the UK, Ireland, the US and Australia, who do their own takeoffs and pricing.
How much does it cost? The MCP connection is included with every Assemble Pro trial and paid plan at no extra cost. You need your own Claude or ChatGPT account.
Start a free trial and connect your AI assistant in about five minutes.

