
How to Use Claude AI for Construction Takeoff and Estimating (Real Job Demo)
Claude can do your construction takeoff and build the estimate, but only if it has somewhere to work from. On its own, Claude starts every chat from scratch. Connected to Assemble Pro, it works from your templates, rates and past jobs, built up over weeks and months.
See the Assemble Pro AI page for the setup steps, what it can do and pricing.
Keith Moore is our co-founder and a carpenter and builder by trade. He connected Claude to his Assemble Pro account and asked it to price a full house build. It took about 20 minutes to go from plans to a priced estimate, ready for him to review.
This post covers what Keith gave Claude, what Claude did with it, what you still need to check, and how to set it up yourself. For the launch announcement and full permission details, see Assemble Pro now works inside Claude and ChatGPT.
What Keith gave Claude
Keith gave Claude three things: the plans, the specs and a short brief typed into the chat. The brief set out the scope that wasn't obvious from the drawings:
Underfloor heating throughout the whole house
Re-roof the whole house, not just the extension
Oak floors throughout
Terracotta tiles on the bathroom floors
External insulation around the whole house
He finished by telling Claude to ask him if it had any questions along the way.
A brief like this works well:
Here are the plans and specs for this job. Use my standard template and current rates. Allow for underfloor heating throughout, a full re-roof, oak floors throughout, terracotta tiles in the bathrooms and external insulation on the whole house. Do the takeoff, then build the estimate. Ask me if anything is unclear.
That is an example, not Keith's exact wording. The point is to give Claude the scope decisions it can't read off a drawing.
How Claude took the job from plans to price
The whole job ran in seven steps. Claude did the measuring and the number work, and Keith reviewed each stage before moving on.
1. Build a template from your past jobs
Before this job, Keith asked Claude to build a template from his previous jobs and his local supplier's rates. It runs from preliminaries through to finishes, with 120 items covering everything he would normally measure or allow for. It's saved in his Assemble Pro account, so he only had to do it once.
2. Turn measurements into build-ups with assemblies
An assembly turns one measurement into every material and labour line it needs. Measure a floor area once and you get the screed and concrete. Measure a wall once and you get the full build-up.
Keith's internal wall assembly covers studs, insulation, plasterboard, drywall screws, tape, finish plaster, carpentry labour, plasterboard fixing and plastering labour. Each one is priced at his own rates.
3. Give Claude the plans, specs and brief
Keith gave Claude the drawings, the specs and the scope brief above. Claude applied his template to the job.
4. Let Claude measure the takeoff
Claude measured across the site plan, roof plan and elevations:
External works: driveway, paving, paths and lawn
Roof: coverings, ridges, valleys, lead to valleys, eaves and gutters
Elevations: internal dry lining and external render
5. Review every measurement on the drawings
Keith's tip: hide every measurement, then unhide them one at a time and check each against the drawing. He checked the driveway and paving areas matched the site plan. It's faster than measuring yourself, but you still look at every one.
6. Use your template as a checklist
On the review quantities page, the template doubles as a checklist. Go down it and confirm every item that applies has been measured. If something is missing, go back and measure it, or ask Claude to.
Zeros are fine. Not every job uses every line in your template. The point is that you've made a decision on each one.
7. Adjust the estimate and send it
On the estimate page, everything runs off rates, so one change carries through. Keith changed the programme from 20 weeks to 30, and site fencing, the site office and the other time-based prelims all updated to 30 weeks.
From there you set markup and margin, and VAT per item or on the total. Claude also drafts the scope notes and terms and conditions.
The last step is choosing what the client sees. You can hide quantities, units, category subtotals or line totals. Plenty of contractors leave line totals off, because every line gets queried. Then you review it and send.

What you still check
Claude does the measuring, but the price is still yours. Treat its takeoff like a takeoff from a new estimator: quick, thorough, and checked before it goes anywhere.
Every measurement. Look at each one against the drawing, as Keith does in the video.
Scope. Claude only knows what's in the drawings, the specs and your brief. Anything you agreed on site needs to be in the brief.
Busy drawings. Cluttered or open-plan drawings are harder to trace, and scanned drawings may have no readable text.
The numbers before you send. Programme length, markup, margin and VAT are your calls.
Claude can't change your account behind your back. Every change it proposes is previewed, and nothing is saved until you approve it. Sending estimates is switched off by default, so Claude can't send anything to a client unless you turn that on.
Why Assemble Pro is the part that makes it work
Claude is good at reading drawings and doing the arithmetic. What it doesn't have is a memory of your business. Every new chat starts blank: it doesn't know your rates, your supplier, how you build a wall or what you charged on the last job.
Assemble Pro is where all of that lives. Your priced items, assemblies, templates, projects and estimates are stored in your account and stay there, job after job. Claude reads from it and writes back to it, with your approval each time.
That's what turns a clever chat into a system you can rely on:
Your rates, kept current. When your supplier sends a new price list, give it to Claude and it updates the rates across your account. Every estimate after that uses the new prices.
Your build-ups, done once. An assembly you set up in March is still there in September. Fix a rate or a labour figure once and it's right on every job after.
Your jobs, on record. Measurements, quantities and estimates are saved against the project. Come back to a job weeks later, change the scope and reprice it without starting again.
Your template as a checklist. It prompts you on every item, so nothing gets missed because you were in a hurry.
Keith's 20 minutes only works because his template and rates were already in Assemble Pro. The time saving comes from Claude working on top of months of his own pricing, not from Claude guessing.
How to set it up
Connecting Claude to Assemble Pro takes about two minutes. It's included at no extra cost on every Assemble Pro trial and paid plan. You need your own Claude account, and a paid Claude plan is the safest bet.
In Claude, go to Settings → Connectors and click Add custom connector.
Name it "Assemble", enter https://app.assemblepro.com/api/mcp and click Add.
Click Connect and sign in to Assemble Pro.
Choose your workspace and permissions, then click Allow.
Start a new chat and ask: "Which Assemble workspace am I in?" If it answers, you're connected.
Then set up your template and rates first. Upload a past job or your supplier's price list and ask Claude to build them for you, as Keith did.
Using ChatGPT instead? The same connection works there. The launch post has the ChatGPT steps and a troubleshooting guide.
Start a free trial of Assemble Pro
FAQ
Can Claude do a construction takeoff?
Yes, when it's connected to takeoff software like Assemble Pro. Claude reads the drawings and takes the measurements in your account, then you review each one before it's used.
How long does an AI takeoff and estimate take?
In Keith's demo it took about 20 minutes to go from plans to a priced estimate on a full house build. That assumes your template and rates are already set up.
Does Claude use my own prices?
Yes. It works from the template, rates and assemblies in your Assemble Pro account, not generic figures.
Why not just use Claude on its own?
Claude on its own forgets everything between chats, so you'd re-explain your rates and build-ups every time. Assemble Pro stores your templates, rates, assemblies and jobs for weeks and months, so Claude picks up where you left off.
Does it work with ChatGPT?
Yes. Assemble Pro connects to both Claude and ChatGPT using the same address.
Can I send an AI estimate without checking it?
No. Review every measurement and the final numbers. Claude can't save a change without your approval, and it can't send estimates unless you allow it.
What does it cost?
The connection is included at no extra cost on every Assemble Pro trial and paid plan. You need your own Claude or ChatGPT account.

